The bathroom did not check these. The renovation was equal to the white renovation.

  Buy a second-hand house to erase the mark of others;

  The house is too old to reload;

  The way the home looks a bit tired, you need to change a new look;

  ……

   whatever the reason, the house Renovation requires more attention than the renovation of new homes. Renovation is not a simple matter of repainting the surface. Renovation is a safety check on the entire house to identify potential problems. So what should you pay attention to when renovating the bathroom?

  The most important thing in the renovation of the bathroom is hydropower inspection

  If the house is older, be sure to watch Whether the water pipeline is still using the galvanized pipe that has been eliminated.

  Check if the waterway is matching the new bathroom layout.

  Check if the water pipe is aging or rusting.

  Must take 24-48 hours for the bathroom The water storage side leakage test , to check the waterproof ability of the bathroom, if the water leaks, it is necessary to redo the waterproof project.

   The original circuit of the bathroom should be able to see if it can withstand the electricity demand of existing home appliances. Especially in the bathroom, smart toilets, bathroom cabinets, etc. have been introduced.

   In fact, Xiaobian still wants to suggest that no matter whether the original circuit can withstand the power demand, the circuit of the bathroom is best re-routed when renovating, after all, the circuit is related to household safety hazards. And it’s best to replace all the wires, and aging wires or aluminum wires can cause fires.

 Check for the “concealed project” in the bathroom

   According to the construction master, if there is a quality problem in the home decoration 80 % is caused by improper construction of “concealed works”. Therefore, the concealed works of the bathroom must not be ignored.

  Checking the “concealed work” of the bathroom requires ventilation The pipes, lines, and equipment of facilities such as warm air outlets should be sealed. , and the insulation and resistance of electrical appliances should be tested. Check that the connection of each circuit is not firm, the joints meet the current standards, and the “concealed engineering” problem that may be left in the bathroom is completely solved.

 Do you need to replace the doors and windows of the bathroom?

  This can be divided into three situations:

   First, if the decoration style changes too much, the doors and windows are incompatible with the new style. That is still changing!

  Second, if the original doors and windows remain intact, the style is very like, then repainting should not waste money.

   The third door window is peeled, deformed, cracked, etc., it is necessary to consider re-newing.

  Does the bathroom appliances need to be replaced?

  Electrical appliances have a lifespan.

  The safe life of the electric water heater is 8 years, and the safety hazards caused by the service life include “explosion accidents, Electric shock and electric shock accidents, product spontaneous combustion accidents.”

  The life of the washing machine is 10 years. Overage may cause problems such as water leakage, electric leakage, and body heat.

  The toilet has a service life of 8 years, and the aging toilet may burst or even explode.

   However, most of the renovations will generally choose to buy new appliances to replace. The most tangled one should be whether the toilet buys a normal or smart toilet or can directly purchase a smart toilet cover directly on the original basis.

  If you want to try the intelligent toilet, you are a little worried about whether you will get used to it, or if the ordinary toilet in your home has just changed for a few years, you can choose to try it. The smart toilet cover is affordable and can experience the function of a smart toilet.

  Renovation is equivalent to a one-time solution to home security risks, so it is not possible to simply refresh the surface. Refurbishment inspection of the bathroom, you should not ignore the various inspectionsCheck it out!

<


Relevant recommended products

PVC Free Foam Board /PVC Sheet for Transportation

*New PPR Fitting Male &amp; Female Threaded Coupling Used in Industrial Fields and Agriculture

ppr pipes plastic pipes used in garden irrigation 2017

PP-R stop valve with straight Made in China

Mill Roll for High Class and High Strength Plate Mill

Again innovation, foam metal

Foam metal, which is a porous metal, such as aluminum or zinc, represents a new class of ultra-light materials that produce sufficient stress in relatively small materials, primarily for automotive and orthopedic applications. Applications, metal foam materials exhibit highly effective recyclable materials.
Researchers at the Technical University of Berlin, the University of Nottingham and the Helmholtz-Zentrum in the UK have recently developed a foaming of metals through waste materials. An article was published in Advanced Engineering Materials, and the scientist completely described the method of making aluminum foam from waste aluminum cans. In a particular solution, the researchers melted aluminum chips or chips and then added a blowing agent to create the desired foam structure. Through continuous efforts, the new foam does not require expensive additives, and the demand for additives is also reduced.
This discovery by scientists has made the recycling of metal scrap more meaningful, and it has also made it possible to reuse resources.



Relevant recommended products

150X150 square steel billets low carbon

HJVV Bureau of symmetrical cable used in digital switching equipment

Round Knife Shears for Tinplate Cutting with Good Quality

Pump impeller

Seamless Knitted Nitrile Working Glove Waterproof Long Gloves

Imagine Finchley Memorial Hospital with green tones

In 1908, a small cottage opened in a quiet area in northern London, blossoming in 1948 as a general hospital and, ultimately, a community hospital. As the surrounding residential communities began to thrive, moderate health care institutions began to look for urgent needs for resource stretching and self-construction.

As soon as possible to help the local government take the initiative to improve the financial trust fund (LIFT) lease property prime health care trust fund in the form of health care professionals or groups. Designed by Murphy Phillips Architects, the Finchley Memorial Hospital is necessary to expand and modernize this local medical facility, which involves dismantling the original cottages and creating a state-of-the-art sophisticated medical complex.


Relevant recommended products

Adjustable Steel Props of Scaffolding System

One Side Textured Hdpe Geomembrane for Landfill to Prevent the Waste Water

Lifting Equipment Crane for Steel Plant Rake Crane

Professional PVC Panel Manufacturer Tongue and Groove Ceiling

Polyester Filament Needle Punched Nonwoven Geotextile

Seaside home on the east coast of Ireland

With the existing private beach, a new beachfront holiday home occupies a long-term summer house. Resonance of the size and location of neighboring mobile homes.

The parallel wall-to-wall residence is open to the East of Ireland.



Relevant recommended products

Angle Steel Hot Rolled ASTM A36 Or Q235B

HDPE Geocell with CE Certificate,Manufacturer directly

Tinplate Coil and Sheet for Metal Packing

Plain Aluminium Foil For Cable Application

Automatic Food Beverage Tomato Paste Juice Tin Can Making Machine Line

What causes diatom mud cracking?

The normal service life of diatom mud wall surface can be as long as 20 years. There will be no cracking or falling off during construction, but the diatom mud cracking happens sometimes. If there is cracking or falling off, we should find out the cause. After that, what should we do?
Wall cracking affects diatom mud

1. The structure of the wall itself is not treated before the diatom mud, and the original wall itself has cracks. No treatment is done.

2, the wall itself is no problem, but in the late room settlement ground settlement uneven, temperature changes, etc. will also cause wall cracking. Usually there are two types of cracks that require the repair of the wall base before the diatom mud can be done.

Bottom cracking of wall joints

Most cracks at joints occur at the joints of reinforced concrete shear walls and blocks, reinforced concrete beams and plates or slabs The seam of the block, the construction door hole of the rear building, the slat partition wall and the joint of the original wall wall. The reason for the cracking in this place is the influence of external forces, resulting in shortened changes in gypsum board and prefabricated partition wall panels. The surface crack of the diatom mud is due to this reason, mainly because the gap is not treated well; the wall surface is not subjected to anti-cracking measures to prevent joints.

The cracking of the putty layer

If the crack occurs in the wall putty layer, the surface crack will occur. In the construction, pay attention to the upper wall of the putty layer and the cracking of the putty layer. The bonding strength with the putty is not enough, and there is no anti-cracking measures.

diatom mud cracking caused by cracking of plaster layer

Wall plaster layer cracks are divided into normal cracking and abnormal cracking: normal cracking mainly refers to The plaster layer caused by the shrinkage of the cement mortar exhibits cracks; the abnormal condition is caused by improper construction process. Be sure to handle it before applying diatom mud, otherwise it will not be repaired. If there is a large area of ​​empty plaster on the plastering layer, the original plastering layer should be knocked out, and the plastering layer of the cement mortar should be re-applied. After leveling, the diatom mud should be brushed according to the normal process.

(provided by Shenyang Building Materials Network) <


Relevant recommended products

Golf balls are placed in green artificial grass golf.

SAE1018 steel round bar/ASTM A36 steel equivalent

Solar Energy,Solar Power Panel,Alternative Energy

boiler tube seamless carbon steel pipe for high pressure

Baby Blue C7 LED Bulb Light String for Outdoor Indoor Wedding House Garden Decoration

Under the new retail wave, how about the new home brand with online traffic dividends?

Rising new online brand new online

Under the new retail wave, those who have received online traffic bonuses The new home brand does not seem to have saved enough energy to support its offline layout.

The rise of e-commerce channels has given many new brands opportunities. The author believes that home e-commerce can be roughly divided into two categories, one is the online business of traditional home brands, and the other is the new small and medium-sized home brand emerging from the Internet, with the most typical of “Amoy brand”.

“Young people buy online from online purchases, not to move offline products online. They don’t necessarily recognize traditional brands.” According to founder Song Bing, the brand must be built on a new organization, a new institution, and a new corporate culture. The genes of traditional brands have been fixed, and it is difficult to make breakthrough changes even if new product lines are developed.

In addition, in the original product line, the traditional home brand can maintain sustained performance growth, it seems that there is no strong demand for online market. Song Bing is ranked in the US For example, in the top four mattress brands, these mattress brands have not made new product line layouts in the past 50 years, but are more inclined to acquire new brands.

The pineapple zebra is also A member of the net red new brand camp. Based on the push of home furnishings, the platform brings together young people from the first and second tier cities, aged 26 to 36. Like most new brands, Pineapple Zebra is good at user research. They sum up the four consumption characteristics of the platform fan group: one is functionalism, not too high maintenance cost; the other is attention to comfort, unlike the previous generation. Like solid wood or the pursuit of big brands; third is the aesthetic trend towards soft colors; fourth, the price is reasonable, does not cause economic burden.

Explosive marketing is a new style of driving. From the perspective of the pineapple zebra brand, the new explosion cycle is about half a year. Since 2017, the brand has launched four sets of Danshan glutinous rice sheets, neck pillows, air fiber mattresses and other explosion products.

Explode The strategy is more focused on detonating the market from a single product category, driven by price to obtain heat. Song Bing said that a brand’s deeper business strategy is not to maintain the continued purchasing power of a certain explosive product, but to continuously innovate products. This requires these new brands to have deeper user research capabilities.

Two-way interaction with users to explore innovative categories

User Needs Research is the first step to understanding users. In Song Bing’s experience, every product on the platform needs to be researched and returned to more than 500 consumer users. Many hidden user needs need to be returned to be discovered. For example, most users feel that the mattresses at home are too soft. After in-depth research, they learned that Chinese people’s demand for mattresses is inconsistent with most foreign users. Chinese people prefer hard mattresses. In addition, consumers need more ventilated and cleaner mattresses, so in the development and marketing of the products, Pineapple Zebra chose air fiber materials that combine cost performance and product performance.

The choice of new products is not entirely consumer-oriented, and consumers also need to be guided. However, domestic consumers know very little about mattress materials and functions. On the one hand, the pineapple zebra spreads new materials to consumers through its own content platform; on the other hand, the team continues to broaden the brand’s content influence, using small red books, knowing, vibrating and other channels to popularize sleep-related science. The theory also cooperates with KOL in the subdivisions such as doctor Clove and mother-child platform to direct relevant knowledge to the target group.Take the mother and baby platform users as an example, they pay attention to the needs of pregnant women and emphasize the ventilation function of the mattress.

The purpose of popularizing new knowledge is to change consumer stereotypes. Song Bing said that domestic consumers’ mindset for mattresses is limited to the decoration cycle. The biggest problem in buying new mattresses is not the product itself, but the replacement of old mattresses.

The exploration of new categories is not all focused on users. In the bottom product thinking, the new brand of Net Red still draws on the experience of traditional brands. For example, when it comes to dream lily, it is associated with memory cotton. Song Bing believes that in the face of consumers, new brands also need to be explained by functions, if there is no new Materials and new features make it difficult to have product advantages.

This alternative approach to product thinking also avoids strong competition in online new retail channels. Although the emerging channels such as Netease’s strict selection and Xiaomi’s home are more powerful in sales, the channel itself does not have the function of educating consumers. In terms of selection, these channels will first select a single item with high cost performance and relatively mature consumer education. Therefore, the new functional products are the breakthrough of the new brand of Net Red.

Online potential is still insufficient, offline timingImmature

Since Ma Yun proposed the new retail concept in 2016, the offline channel has been re-emphasized. The value of the home as a high-price customer experience, the value of the offline experience store is self-evident. However, the home textile brand that has risen online is still not a benchmark for doing it online.

Song Bing said: “When the online potential energy has not yet risen, the offline line may be taken care of. The new brand should use the leverage to go online and get the difference advantage.” It is believed that some well-known D2C brands in the United States have achieved certain popularity in the social e-commerce platform, and they have begun to lay out the line so that they can form a dimensionality reduction against traditional brands.

From the online mode alone, the experience is its obvious shortcomings. After all, home is still a big consumption, consumers pay attention to product experience. However, Song Bing believes that the online consumer experience can be reflected in many aspects. On the one hand, it is necessary to solve the pain point by approaching the consumer; on the other hand, 180 days of no reason to return the service is a few minutes than the offline store. The experience is deeper.

However, to form a home brand barrier, offline mode is essential. For new brands The challenge is that offline operations are another set of models that are different from the online ones, and new teams are needed for new exploration. If the new brand is online before the potential is up, it will be in terms of rent, location, etc. Not dominant.

For these new online brands that are good at online marketing and good at online marketing, what is more needed is to deepen the online market and save more brand power. Behind it, the brand is required to have a continuous stream of innovation capabilities. This requires more time for new brands to integrate resources such as designers and supply chains.

<


Relevant recommended products

Dimmable Filament LED Bulb Vintage Edison UL COB

Sic Graphite Crucible in MF Induction Furnace

0.7mm 0.8mm 1.2mm 16.mm 25kg/coil Electro Galvanized wire

New PPR Equal Tee for Industrial Fields and Agriculture Fields

Square Bar, Mild Steel Billet From China Manufacturer

Calgary’s Skyline 707 Fifth Street Building

Skidmore, Owings and Merrill have designed an oval new office building in the heart of downtown Calgary, which has emerged. The 27-story building was unveiled and will be built at the Manulife Real Estate Management Office hub project by Calgary. This is destined to be completed in March 2017.

With floor-to-ceiling glass to enhance natural daylighting and provide advice for commercial customers in the Rocky Mountains, 707 Fifth Street The goal is to recognize it in its 564,000 square foot flawless LEED gold medal.


Relevant recommended products

color wire rope with more conpetitive price

PPR Tee Fittings of Industrial Application Made in China Professional

Cryogenic Fiberglass Insulation Paper with Aluminium Foil for LNG Cylinder

pipe fittings for steel mesh reinforced PE pipe

Fiberglass Mesh for Building Construction Use

Carpet cleaning and maintenance, find out

Carpet: Because of its beautiful, safe, comfortable, clean, sound-absorbing, heat-insulating and other characteristics, in addition to the hotel restaurants, hotels are full of carpets, is also widely used in conference rooms, restaurants, offices, clubs, Various occasions such as exhibition halls. Depending on the textile fiber material, there are three main types of carpets commonly used in hotel restaurants, namely chemical fiber carpets, wool carpets and blended carpets. In addition to some public areas that are prone to water, the hotel restaurant usually does not have low-grade chemical fiber carpets, and most of them use blended carpets with a higher ratio of wool fibers. The carpet renewal period is generally 5-7 years, but this does not mean that the maintenance of the carpet can be ignored. If the maintenance is not proper, it will be devastated in one or two years; if it is well maintained, it will be beautiful and soft as new after five years, so it is absolutely impossible to clean and maintain the carpet in the operation of the restaurant. How to do the cleaning and maintenance of the carpet?
Reducing engineering pollution

Because paving carpets should reduce the pollution caused by engineering construction. There are two key points:

1. Neat, no dust. This requires that the cement floor should be cleaned in all directions before the construction;

2. During the construction, the engineers and technicians should do a good job of dust prevention and bring as much dust as possible. The prevention of deep-level pollution sources is to prevent the carpet from being contaminated after the dust on the ground or rubber mats is washed in the subsequent carpet cleaning.

Control pollution sources

Hotel carpets are mainly used in guest rooms and dining areas. The pollution sources of carpets in the rooms are: push-pull at work, back and forth, luggage and luggage, engineering Maintenance, room bathroom water stains, etc.

The pollution sources of carpets in the dining area are: kitchen oil, restaurant carts, etc.

Do a good job in the maintenance of carpets in these areas, to minimize the source of pollution, such as: regularly clean the wheels of the work car, take protective measures during the maintenance of the project, put scrap sheets in the construction site, when the waiter cleans the room, A small carpet is placed on the door of the bathroom; a dust-proof rubber pad is placed at the door of the hotel to strengthen the kitchen floor, and the carpet is placed at the kitchen door to reduce oil pollution.

Doing a good job in daily vacuum

Thorough vacuuming is the most important task in maintaining the carpet. Vacuuming can not only remove the dust accumulated on the surface of the carpet. It can also absorb the gravel hidden in the bottom of the carpet to prevent them from cutting the fibers at the root of the carpet fiber when they come and go, and often vacuuming can reduce the number of times the carpet is washed and restore the elasticity and softness of the carpet. The court has a long life.

(1) carpet dusting is usually required once a day in the hotel room area; areas with frequent customer activities (such as halls, restaurants, shopping malls, etc.) cannot be less than three times a day, and vacuum cleaners can be used on weekdays. However, the vertical vacuum cleaner should be used to thoroughly remove the residue, sand, etc. of the carpet root;

(2) Eliminate large garbage and sharp objects in the area before dust removal;

(3) When dusting, the vacuum cleaners in the corners of the guest rooms or public areas, walls, etc. should be equipped with suitable vacuum cleaner fittings;

(4) When vacuuming, the method should be carried out from the inside out. And in a certain order, in case of omission;

(5) The suction should be of the push-pull type. When pushing, the hair should be reversed. When pulling, the hair should be smoothed to ensure that the carpet fibers that are sucked are inverted. Sex, after the step, the carpet is not easy to come out of the yin and yang.
Carpet: Because of its beautiful, safe, comfortable, clean, sound-absorbing, heat-insulating and other characteristics, in addition to the hotel restaurant, hotel full carpet, is also widely used in conference rooms, restaurants, Offices, clubs, exhibition halls and other occasions. Depending on the textile fiber material, there are three main types of carpets commonly used in hotel restaurants, namely chemical fiber carpets, wool carpets and blended carpets. In addition to some public areas that are prone to water, the hotel restaurant usually does not have low-grade chemical fiber carpets, and most of them use blended carpets with a higher ratio of wool fibers. The carpet renewal period is generally 5-7 years, but this does not mean that the maintenance of the carpet can be ignored. If the maintenance is not proper, it will be devastated in one or two years; if it is well maintained, it will be beautiful and soft as new after five years, so it is absolutely impossible to clean and maintain the carpet in the operation of the restaurant. How to do the cleaning and maintenance of the carpet?

Reducing engineering pollution

Because paving the carpet should reduce the pollution caused by the construction, there are two main points:

1, to ensure that the concrete floor is clean and tidy, there should be no dust. This requires that the cement floor should be cleaned in all directions before the construction;

2. During the construction, the engineers and technicians should do a good job of dust prevention and bring as much dust as possible. The prevention of deep-level pollution sources is to prevent the carpet from being contaminated after the dust on the ground or rubber mats is washed in the subsequent carpet cleaning.

Control pollution sources

Hotel carpets are mainly used in guest rooms and dining areas. The pollution sources of carpets in the rooms are: push-pull at work, back and forth, luggage and luggage, engineering Maintenance, room bathroom water stains, etc.

The pollution sources of carpets in the dining area are: kitchen oil, restaurant carts, etc.

Do a good job in the maintenance of carpets in these areas, to minimize the source of pollution, such as: regularly clean the wheels of the work car, take protective measures during the maintenance of the project, put scrap sheets in the construction site, when the waiter cleans the room, A small carpet is placed on the door of the bathroom; a dust-proof rubber pad is placed at the door of the hotel to strengthen the kitchen floor, and the carpet is placed at the kitchen door to reduce oil pollution.

Doing a good job in daily vacuum

Thorough vacuuming is the most important task in maintaining carpets.It can only remove the dust accumulated on the surface of the carpet, and can also remove the gravel hidden in the bottom of the carpet, preventing them from cutting the fiber at the root of the carpet fiber when people come and go, and often vacuuming can reduce the number of times the carpet is washed. To restore the elasticity and softness of the carpet, the length of its life.

(1) carpet dusting is usually required once a day in the hotel room area; areas with frequent customer activities (such as halls, restaurants, shopping malls, etc.) cannot be less than three times a day, and vacuum cleaners can be used on weekdays. However, the vertical vacuum cleaner should be used to thoroughly remove the residue, sand, etc. of the carpet root;

(2) Eliminate large garbage and sharp objects in the area before dust removal;

(3) When dusting, the vacuum cleaners in the corners of the guest rooms or public areas, walls, etc. should be equipped with suitable vacuum cleaner fittings;

(4) When vacuuming, the method should be carried out from the inside out. And in a certain order, in case of omission;

(5) The suction should be of the push-pull type. When pushing, the hair should be reversed. When pulling, the hair should be smoothed to ensure that the carpet fibers that are sucked are inverted. Sex, after the step, the carpet is not easy to come out of the yin and yang.
(provided by Shenyang Building Materials Network) <


Relevant recommended products

Prepainted gavalume steel coil

Automatic Production Line for Door Skins

Excellent Quality Aluminum Foil Laminate Foil PET

High Strength Multifilament Civil Non-woven Geotextiles

PPGI Prepainted Galvanized Steel Coil/Hot Dipped Galvanized Steel Coil

Allianz headquarters headquarters mixed office is nearing completion

The construction is nearing completion, the office building designed by the architects of the University of ARETS, Wallisellen, the company of Allreal Generalunternehmung, Switzerland, Allianz Switzerland. The hybrid development consists of two gleaming volumes – one high outside and the other five high – connected by a series of bridges.

The images provided by the practice of construction work show different stages of completion, due to completion in October. A total of 72,000 square meters of facilities including office units, staff facilities, retail facilities, restaurants and cafes animated monochrome abstract patterns have a rich appearance in glass. This model reflects the subtle imprinted ceiling inside the building.


Relevant recommended products

Hot Rolled Aluminium Coil AA1060 for Building

Concrete Machinery Planetary Mixer on sale

Color coated galvanized rolled steel coil

SOLAR PANELS FOR 250W for HIGH EFFICIENCY ,SOLAR MODULES FOR 250W

2017 Artificial Grass Football Field &amp; Indoor Futsal Field 40mm

What is the reason for the lowering of the draining function of the floor drain?

Looking at the drainage of big cities, are you worried about the drainage situation in your home?

   In fact, don’t underestimate the water pipes and floor drains. If the water pipes are blocked, it is not easy to solve their problems. The space is difficult to open.
  When you look at the parts of these water pipes, you know that this part of the work is not so high, but it is absolutely important. The quality of each interface and water pipe is directly related to the quality of the decoration, so please do not care when choosing a water pipe.

   From the overall layout of the home, the kitchen and bathroom are the most used places, and the most concentrated part of the water pipes. However, how to control the drainage quality of these two spaces, please see how the home sister said?

   kitchen water pipe arrangement

  When pouring hot water, we generally do not dare to pour directly in the sink because the water temperature is too high May affect the quality of the water pipe. In fact, it is plain, that is, you have no confidence in the quality of your home plumbing.

   Many people will selectively buy building materials. Some places that seem to be hidden will choose cheaper products. However, in the hidden places, accidents are not handled well, so Choosing good materials, this misunderstanding is still for everyone to consider.   

   After the renovation, our kitchen really works well, but you don’t know that there are a lot of wiring and construction in the early stage to promote the later effect.

  The water pipe wiring is like this. You see that the flat ground actually has a lot of water pipes buried, and the choice of water pipes is still to ensure quality first.
  
  Each water pipe, joint, and tee are all part of the entire waterway construction. The selection of materials is not so easy.

  Drainage method

  The drainage method of the kitchen has two types: upper and lower drainage and side drainage.

  Drainage: The lower drain is the drain on the ground, the downpipe leads directly to the downstairs, the return bend is installed at the bottom, or the tee is added to allow the water to flow smoothly.

   Side drainage: The side drain is located on the main pipe of the kitchen, above the ground, and some of it leads to the main pipe. If the down pipe is connected horizontally in the main downpipe, generally only one return bend can be installed. If not, two can be installed, which can double the anti-taste.

  Purchase and installation advice

   Regardless of the type of drainage, the effect of the pipe used is the same, that is, corrosion resistance, resistance Aging, PVC management on the market is also diverse, and the size is also different. At the time of purchase, we must look for and identify the quality of PVC water pipes, and the thickness and thickness can still be seen as good or bad.

   Generally speaking, the household manager should use 6 in charge, and the in charge can use 4 in charge. Of course, it depends on your situation. Be clear about your home when you buy it. The size used, because the size of the water pipe of the pool is 50, 40, 32, these figures represent the diameter of the pipe, which is 5 cm, 4 cm, 3.2 cm, and the pipe fittings are also of such specifications. Commonly used pipe fittings include down pipe, tee, 90 degree elbow, 45 degree elbow and return bend.   

  Now no glue is used when installing the water pipe. Once the glue is used, the project is dead. After the replacement project is large, the cost is also high; now The upper and lower water pipes can be connected through three-way or four-way. When replacing later, just replace the water pipes that need to be replaced, and do not need to replace them all.

  Bathroom launching, floor draining arrangement

  The washbasin and floor drain of the bathroom are two main projects, and the downpipe has many metal appearances. Compared with plastic water pipes, it has a longer life, corrosion resistance and aging.

   Whether it is S-type or straight-line water pipes, it is still necessary to see the quality, the form is secondary. In general, universal flap type water has the characteristics of high stability and good sealing performance, which can effectively reduce the failure rate.

  If the drain function of the floor drain is reduced instantaneously, this is because your floor drain size is a bit small, or the floor drain is not strong.

   floor drain size

  Generally, the water pipe diameter is 50mm PVC pipe. If the diameter of the cast iron material is larger, it must be purchased. Consider the size of the drain.

   It seems like this is a small piece. In fact, in the process of using, you know how important it is. Therefore, before selecting, you must first make the drain hole with the size of the floor drain, and let the drain port affect the floor drain.

   The floor drain hole diameter should be controlled between 6~9mm to prevent hair, sand and other dirt from entering the sewer pipe, causing blockage; of course, the height of the ground should also be set. In order to allow the water in the bathroom to flow from high to low, drain well and not affect the cleanness of the space.

  If you want to ensure that the drainage space does not affect your life, you should take into account the things that go into the water during the renovation, and consider the hidden dangers of the hidden project in advance, regardless of It is a water pipe or a floor drain. It is a small ring of numerous links in the construction. Please don’t ignore it because it is small. The drainage is all depends on their
(provided by Shenyang Building Materials Network) <


Relevant recommended products

PVC Electrical Foam Adhesive Tape Hot melt Promotion

PVC Pipe Fitting Used in Industrial Fields from China Professional

PVC Ceiling & Wall Panel for Interior Decoration

200w Poly Solar Module With High Efficiency

YHZKB-2XZ series rotary vane vacuum pump